Civil engineering

INSTRIDGE COMPETITION Date:- 01/03/2019 Time:-11:00am-02:00pm

Information:

Walking on a bridge this is highly likely for a Civil Engineer to wonder about its construction to get curious about strength and design to be eager to predict its durability. Instridge is an on the spot event to be conduct. In this event the participants will have to build any types of bridge (Arch, Truss, Combination of both) using the material provided. Thinking at an elementary level, grab the opportunity to make a structure that would stand firm on the stage base of your structural knowledge. 

Rules & Regulation:

Read Carefully to Prepare

 Problem Statement

  1. Participants have to make an Arch, Truss, and Combination of bridge while abiding to the following rules.
  2. Required materials shall be available over the spot at the venue. (required material includes:- Pop stick, glue, cutters and masking tape) OR Participants can bring the required materials by their own (Must Be Verified by Trainer available and should be approved by them).
  3. Teams should of min 2 and max 4 members carrying valid college ID card.
  4. Each team must consist of a at least one member from civil engineering department.
  5. No two teams must have any common member.
  6. Participates are allowed to use electronic gadgets if required

 

Bridge Specifications (Rules)

  1. Fabricate your design using pop stick, glue and cutters.
  2. Bridge type: Truss Bridge, Arch & combination of both compulsory.
  3. Sub-type: Either Under or Over or combination of both.
  4.  Bridge Height :– 15cm±5cm length: –40cm ±5cm,Width :– 10cm ±5mm, Wheel clearance :– 6cm
  5. All types of joints allowed.
  6. Double plating for any of the bridge members is not allowed.
  7.  Time limit: 3hrs

Testing Criteria

  1. Loading will be done using a hook at the center of the bridge.
  2. The loading would be done on the bridge using a 1.8 inch x 8 inch loading plate- connecting hook system. The plate would rest on the deck while the hook connected to the plate would go through the deck and below where it is loaded.
  3. All construction and material requirements will be checked prior to testing. Bridges failing to meet these requirements will be disqualified.
  4. The bridge with the highest structural efficiency, E, will be qualified for winner. E= Load supported in grams / Mass of the bridge in g.
  5. All the dimensions mentioned are acceptable within an error range of + 2%. Any failure in adhering to the specifications will lead to immediate disqualification.
  6. All Decisions of the judges shall be final.

CAD U CAN COMPETITION Date:- 01/03/2019 Time:-2:00pm-05:00pm

Information:

Autodesk Education wants to meet the designers, innovators, and creators of tomorrow. That’s why we promote worldwide design competitions and events that help inspire and prepare students for careers in architecture, engineering, and the digital arts. Employers are also looking to hire new graduates with demonstrated experience and skills. Sharpen your skills, show off your talents, and build your resume with competition experience.

Description of the Competition: This category allows every student to display their very best technical drawings. This category is for 2D CAD drawings. This is a display of the students ability to design ability. The judges will award points based on the Drawing Skills, Neatness & Completeness and Time Span.

Duration: 1 Hour

The other details shall be announced at the time of competition

Problem Statement: Released by spot.

Rules of Competition:

The contestants will be given two floor plan, elevation and section of drawing and task will be to generate the drawing using AutoCAD.

  1. Minimum Qualified Marks: 50% to qualify for Next Level
  2. A complete drawing is required

 

MODELING COMPETITION Date:- 02/03/2019 Time:-2:00pm-04:00pm

Information: 

Be a part of the future development that is awaiting the field of Civil Engineering in the design area by Stadd pro using updated with the latest tools that simulate field conditions at your computer screen. Capture a part of the existing conditions and produce a detailed and precise 3D model to provide real-world context for expansion project. Grab the opportunity of being among the best by participating in the event Modeling by Bentley.

Problem Statement: Released by spot.

Description of the Competition: This category allows every students to display their very best technical drawings. This category is for Stadd Pro designer. This is a display of the students ability to design ability. The judges will award points based on the Drawing Skills, Neatness & Completeness and Time Span.

Duration: 1 Hour

The other details shall be announced at the time of competition

Rules of Competition:

The contestants will be given ground Floor plan/ Beam/ Truss. Have to Analysis and Design of drawing and task will be to generate the drawing using Stadd Pro.

  1. Have to complete in less time.
  2. A complete design is required.
  3. All Decisions of the judges shall be final.